Characterization of photonic band resonators for DNP NMR of thin film samples at 7 T magnetic field

Published: Friday, 28 May 2021 - 00:00 UTC

Author: Thorsten Maly

Nevzorov, Alexander A., Antonin Marek, Sergey Milikisiyants, and Alex I. Smirnov. “Characterization of Photonic Band Resonators for DNP NMR of Thin Film Samples at 7 T Magnetic Field.” Journal of Magnetic Resonance 323 (February 2021): 106893.

https://doi.org/10.1016/j.jmr.2020.106893.

Polarization of nuclear spins via Dynamic Nuclear Polarization (DNP) relies on generating sufficiently high mm-wave B1e fields over the sample, which could be achieved by developing suitable resonance structures. Recently, we have introduced one-dimensional photonic band gap (1D PBG) resonators for DNP and reported on prototype devices operating at ca. 200 GHz electron frequency. Here we systematically compare the performance of five (5) PBG resonators constructed from various alternating dielectric layers by monitoring the DNP effect on natural-abundance 13C spins in synthetic diamond microparticles embedded into a commercial polyester-based lapping film of just 3 mil (76 μm) thickness. An odd-numbered configuration of dielectric layers for 1D PBG resonator was introduced to achieve further B1e enhancements. Among the PBG configurations tested, combinations of high-ε perovskite LiTaO3 together with AlN as well as AlN with optical quartz wafers have resulted in ca. 40 to over 50- fold gains in the average mm-wave power over the sample vs. the mirror-only configuration. The results are rationalized in terms of the electromagnetic energy distribution inside the resonators obtained analytically and from COMSOL simulations. It was found that average of B1e^2 over the sample strongly depends on the arrangement of the dielectric layers that are the closest to the sample, which favors odd-numbered PBG resonator configurations for their use in DNP.